# {{ ansible_managed }}

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
;   workgroup = WORKGROUP
   workgroup = MBR

# Option 'netbios name' added to debian's default smb.conf 
#
# This sets the NetBIOS name by which a Samba server is known. By default it
# is the same as the first component of the host's DNS name. If a machine is
# a browse server or logon server this name (or the first component of the 
# hosts DNS name) will be the name that these services are advertised under.
#
# Note that the maximum length for a NetBIOS name is 15 characters.
#
# Default: netbios name =  # machine DNS name
   netbios name = FILE-MBR


#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0
   interfaces =  192.168.112.10/24  127.0.0.1/8

# Option 'hosts deny' and 'hosts allow' added to debian's default smb.conf 
   hosts deny = 0.0.0.0/0
   hosts allow = 192.168.0.0/16 10.0.0.0/8 127.0.0.0/8

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
#
# Notice:
# If bind interfaces only is set and the network address 127.0.0.1 is not added to the 
# interfaces parameter list smbpasswd(8) may not work as expected due to the reasons 
# covered below.
#
# Default: bind interfaces only = no
   bind interfaces only = yes


#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
;   log file = /var/log/samba/log.%m
   log file = /var/log/samba/%I.log

# Cap the size of the individual log files (in KiB).
;   max log size = 1000
   max log size = 10000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Option 'log level' added to debian's default smb.conf 
#
# The value of the parameter (a astring) allows the debug level (logging level) to be 
# specified in the smb.conf file.
#
# This parameter has been extended since the 2.2.x series, now it allows one to specify 
# the debug level for multiple debug classes. This is to give greater flexibility in 
# the configuration of the system.
#
# See manpage for implemented debug classes
#
# Default: log level = 0
#
# Example: log level = 3 passdb:5 auth:10 winbind:2
   log level = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Option 'ntlm auth' added to debian's default smb.conf 
#
# This parameter determines whether or not smbd(8) will attempt to authenticate
# users using the NTLM encrypted password response for this local passdb (SAM
# or account database).
#
# If disabled, both NTLM and LanMan authencication against the local passdb is
# disabled.
#
# Note that these settings apply only to local users, authentication will still
# be forwarded to and NTLM authentication accepted against any domain we are
# joined to, and any trusted domain, even if disabled or if NTLMv2-only is
# enforced here. To control NTLM authentiation for domain users, this must option
# must be configured on each DC.
#
# By default with lanman auth set to no and ntlm auth set to ntlmv2-only only
# NTLMv2 logins will be permited. Most clients support NTLMv2 by default, but some
# older clients will require special configuration to use it.
#
# The primary user of NTLMv1 is MSCHAPv2 for VPNs and 802.1x.
#
# The available settings are:
#
#    ntlmv1-permitted (alias yes) - Allow NTLMv1 and above for all clients.
#
#    ntlmv2-only (alias no) - Do not allow NTLMv1 to be used, but permit NTLMv2.
#
#    mschapv2-and-ntlmv2-only - Only allow NTLMv1 when the client promises that
#    it is providing MSCHAPv2 authentication (such as the ntlm_auth tool).
#
#    disabled - Do not accept NTLM (or LanMan) authentication of any level, nor
#    permit NTLM password changes.
#
# The default changed from yes to no with Samba 4.5. The default chagned again to
# ntlmv2-only with Samba 4.7, however the behaviour is unchanged.
#
# Default: ntlm auth = ntlmv2-only
   ntlm auth = ntlmv1-permitted

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

# Option 'username map' added to debian's default smb.conf 
#
   username map = /etc/samba/users.map

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700


#============================ Shares ==============================

# {{ ansible_managed }}

[Arbeitsrechtliches]
   comment = Arbeitsrechtliches
   path = /data/shares/Arbeitsrechtliches

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-finanzen
   # allow to write
   write list = @mbr-finanzen

   force group = mbr-finanzen


   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[Arbeitsrechtliches-Trash]
   comment = Papierkorb (Arbeitsrechtliches)
   path = /data/shares/Arbeitsrechtliches/.Trash

   browseable = yes
   read only = yes


[Ausschreibungen]
   comment = Ausschreibungen
   path = /data/shares/Ausschreibungen

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-personal
   # allow to write
   write list = @mbr-personal

   force group = mbr-personal

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[Ausschreibungen-Trash]
   comment = Papierkorb (Ausschreibungen)
   path = /data/shares/Ausschreibungen/.Trash

   browseable = yes
   read only = yes


[BGN-Finanzen-Personal]
   comment = BGN Finanzen Personal
   path = /data/shares/BGN-Finanzen-Personal

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770
   
   # can login into that share
   valid users = @bgn-finanzen-personal
   # allow to write
   write list = @bgn-finanzen-personal

   force group = bgn-finanzen-personal

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[BGN-Finanzen-Personal-Trash]
   comment = Papierkorb (BGN)
   path = /data/shares/BGN-Finanzen-Personal/.Trash

   browseable = yes
   read only = yes


[BVV-Projekt]
   comment = BVV-Projekt
   path = /data/shares/BVV-Projekt

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-buero
   # allow to write
   write list = @mbr-buero

   force group = mbr-buero

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[BVV-Projekt-Trash]
   comment = Papierkorb (BVV-Projekt)
   path = /data/shares/BVV-Projekt/.Trash

   browseable = yes
   read only = yes


[Cobra]
   comment = Cobra
   path = /data/shares/Cobra

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # - since version 4.9
   # -
   create mask = 0660
   directory mask = 2770

   # can login into that share
   valid users = @mbr-buero
   # allow to write
   write list = @mbr-buero

   force group = mbr-buero

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[Cobra-Trash]
   comment = Papierkorb (Cobra)
   path = /data/shares/Cobra/.Trash

   browseable = yes
   read only = yes


[Finanzen]
   comment = Finanzen
   path = /data/shares/Finanzen

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-finanzen
   # allow to write
   write list = @mbr-finanzen

   force group = mbr-finanzen

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[Finanzen-Trash]
   comment = Papierkorb (Finanzen)
   path = /data/shares/Finanzen/.Trash

   browseable = yes
   read only = yes


[MBR]
   comment = MBR
   path = /data/shares/MBR

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-buero
   # allow to write
   write list = @mbr-buero

   force group = mbr-buero

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[MBR-Trash]
   comment = Papierkorb (MBR)
   path = /data/shares/MBR/.Trash

   browseable = yes
   read only = yes


[Mobilisierungsplattform]
   comment = Mobilisierungsplattform
   path = /data/shares/Mobilisierungsplattform

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-buero
   # allow to write
   write list = @mbr-buero

   force group = mbr-buero

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[Mobilisierungsplattform-Trash]
   comment = Papierkorb (Mobilisierungsplattform)
   path = /data/shares/Mobilisierungsplattform/.Trash

   browseable = yes
   read only = yes


[Regishut]
   comment = Regishut
   path = /data/shares/Regishut

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @regishut
   # allow to write
   write list = @regishut

   force group = regishut

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[Regishut-Trash]
   comment = Papierkorb (Regishut)
   path = /data/shares/Regishut/.Trash

   browseable = yes
   read only = yes


[Regishut-Personal-Finanzen]
   comment = Regishut
   path = /data/shares/Regishut-Personal-Finanzen

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @regishut-personal-finanzen
   # allow to write
   write list = @regishut-personal-finanzen

   force group = regishut-personal-finanzen

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[Regishut-Personal-Finanzen-Trash]
   comment = Papierkorb (Regishut-Personal-Finanzen)
   path = /data/shares/Regishut-Personal-Finanzen/.Trash

   browseable = yes
   read only = yes


[RIAS]
   comment = RIAS
   path = /data/shares/RIAS

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770
   
   # can login into that share
   valid users = @mbr-buero
   # allow to write
   write list = @mbr-buero

   force group = mbr-buero

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[RIAS-Trash]
   comment = Papierkorb (RIAS)
   path = /data/shares/RIAS/.Trash

   browseable = yes
   read only = yes


[RIAS-Finanzen-Personal]
   comment = RIAS Finanzen Personal
   path = /data/shares/RIAS-Finanzen-Personal

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770
   
   # can login into that share
   valid users = @rias-finanzen-personal
   # allow to write
   write list = @rias-finanzen-personal

   force group = rias-finanzen-personal

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[RIAS-Finanzen-Personal-Trash]
   comment = Papierkorb (RIAS)
   path = /data/shares/RIAS-Finanzen-Personal/.Trash

   browseable = yes
   read only = yes


[SCAN]
   comment = SCAN
   path = /data/shares/SCAN

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @scan
   # allow to write
   write list = @scan

   force group = scan

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[SCAN-Trash]
   comment = Papierkorb (SCAN)
   path = /data/shares/SCAN/.Trash

   browseable = yes
   read only = yes


[VDK]
   comment = VDK
   path = /data/shares/VDK

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-buero
   # allow to write
   write list = @mbr-buero

   force group = mbr-buero

   vfs objects = recycle
   recycle:keeptree = yes
   # touch access time from this file 
   # note: this is not the modified time, which is
   #       outdatet by ls-command
   # so yo can delete files older then n day with the following command:
   #    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   #
   recycle:touch = yes
   recycle:touch_mtime = no
   recycle:versions = yes
   recycle:maxsize = 10485760  # around 10MB
   recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   recycle:excludedir = /tmp,/temp,/cache,.Trash
   recycle:repository = .Trash/%U
   veto files = /.Trash/

[VDK-Trash]
   comment = Papierkorb (VDK)
   path = /data/shares/VDK/.Trash

   browseable = yes
   read only = yes


[Video]
   comment = Video
   path = /data/shares/Video

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-buero
   # allow to write
   write list = @mbr-buero

   force group = mbr-buero

   #vfs objects = recycle
   #recycle:keeptree = yes
   ## touch access time from this file 
   ## note: this is not the modified time, which is
   ##       outdatet by ls-command
   ## so yo can delete files older then n day with the following command:
   ##    find  /data/samba/share/<share>/.Trash -atime +<n> -exec rm -rf {} \;
   ##
   #recycle:touch = yes
   #recycle:touch_mtime = no
   #recycle:versions = yes
   #recycle:maxsize = 10485760  # around 10MB
   #recycle:exclude = *.tmp,*.temp,*.o,*.obj,~$*,*.~??
   #recycle:excludedir = /tmp,/temp,/cache,.Trash
   #recycle:repository = .Trash/%U
   #veto files = /.Trash/

#[Video-Trash]
#   comment = Papierkorb (Video)
#   path = /data/shares/Video/.Trash
#
#   browseable = yes
#   read only = yes


[Kamera]
   comment = Kamera
   path = /data/shares/Kamera

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-kamera
   # allow to write
   write list = @mbr-kamera

   force group = mbr-kamera

## ----------


[Backup-RO]
   comment = Backup (altes System)
   path = /data/shares/Backup-RO
   readonly = yes


[Install]
   comment = Install
   path = /data/shares/Install

   browseable = yes
   read only = no
   writeable = Yes

   create mask = 0660
   force create mode = 0660
   directory mask = 2770
   force directory mode = 2770

   # can login into that share
   valid users = @mbr-admins
   # allow to write
   write list = @mbr-admins

   force group = mbr-admins


[printers]
    comment = All Printers
    path = /usr/local/samba/var/spool
    browseable = Yes
    read only = No
    printable = Yes

[print$]
    comment = Point and Print Printer Drivers
    path = /usr/local/samba/var/print
    read only = No