install_opendmarc.sh: adjust configuration file.

install_opendmarc.sh

@@ -23,7 +23,7 @@ opendmarc_socket_dir="${postfix_spool_dir}/opendmarc"
 opendmarc_socket_file="${opendmarc_socket_dir}/opendmarc.sock"
 
 config_file_name_value_parameters="
-   AuthservID|OpenDMARC
+   AuthservID|DMARC check $(hostname -f)
    PidFile|/run/opendmarc/opendmarc.pid
    RejectFailures|true
    Syslog|true
@@ -36,6 +36,7 @@ config_file_name_value_parameters="
    FailureReports|false
    AutoRestart|true
    HistoryFile|/run/opendmarc/opendmarc.dat
+   SPFIgnoreResults|false
    SPFSelfValidate|true
    Socket|${opendmarc_socket_file}
 "
@@ -182,6 +183,200 @@ else
 fi
 
 
+# - Add 'IgnoreHosts' with default value to the original opendmarc.conf file
+#
+echononl " Add 'IgnoreHosts' with default value to the opendmarc.conf file.."
+if ! $(grep -q -E "^IgnoreHosts\s+" ${opendmarc_conf_file} 2> /dev/null) ; then
+   cat << EOF >> ${opendmarc_conf_file}
+
+## Specifies the path to a file that contains a list of hostnames, IP addresses,
+## and/or CIDR expressions identifying hosts whose SMTP connections are to be
+## ignored by the filter. If not specified, defaults to "127.0.0.1" only.
+#
+IgnoreHosts 127.0.0.1
+EOF
+   if [[ $? -eq 0 ]] ; then
+      echo_ok
+   else
+      echo_failed
+      error "$(cat $log_file)"
+   fi
+else
+   echo_skipped
+fi
+
+
+# - Add 'IgnoreAuthenticatedClients' with default value to the original opendmarc.conf file
+#
+_param="IgnoreAuthenticatedClients"
+echononl " Add '${_param}' with default value to the opendmarc.conf file.."
+if ! $(grep -q -E "^${_param}\s+" ${opendmarc_conf_file} 2> /dev/null) ; then
+   cat << EOF >> ${opendmarc_conf_file}
+
+## If set, causes mail from authenticated clients (i.e., those that used 
+## SMTP AUTH) to be ignored by the filter. The default is "false".
+#
+IgnoreAuthenticatedClients false
+EOF
+   if [[ $? -eq 0 ]] ; then
+      echo_ok
+   else
+      echo_failed
+      error "$(cat $log_file)"
+   fi
+else
+   echo_skipped
+fi
+
+
+# - Add 'RequiredHeaders' with default value to the original opendmarc.conf file
+#
+_param="IgnoreAuthenticatedClients"
+echononl " Add '${_param}' with default value to the opendmarc.conf file.."
+if ! $(grep -q -E "^${_param}\s+" ${opendmarc_conf_file} 2> /dev/null) ; then
+   cat << EOF >> ${opendmarc_conf_file}
+
+## If set, causes mail from authenticated clients (i.e., those that used
+## SMTP AUTH) to be ignored by the filter. The default is "false".
+#
+IgnoreAuthenticatedClients false
+EOF
+   if [[ $? -eq 0 ]] ; then
+      echo_ok
+   else
+      echo_failed
+      error "$(cat $log_file)"
+   fi
+else
+   echo_skipped
+fi
+
+
+# - Add 'RequiredHeaders' with default value to the original opendmarc.conf file
+#
+_param="RequiredHeaders"
+echononl " Add '${_param}' with default value to the opendmarc.conf file.."
+if ! $(grep -q -E "^${_param}\s+" ${opendmarc_conf_file} 2> /dev/null) ; then
+   cat << EOF >> ${opendmarc_conf_file}
+
+## If set, the filter will ensure the header of the message conforms to the basic 
+## header field count restrictions laid out in RFC5322, Section 3.6. Messages 
+## failing this test are rejected without further processing. A From: field from 
+## which no domain name could be extracted will also be rejected.
+#
+RequiredHeaders false
+EOF
+   if [[ $? -eq 0 ]] ; then
+      echo_ok
+   else
+      echo_failed
+      error "$(cat $log_file)"
+   fi
+else
+   echo_skipped
+fi
+
+
+# - Add 'AutoRestart' with default value to the original opendmarc.conf file
+#
+_param="AutoRestart"
+echononl " Add '${_param}' with default value to the opendmarc.conf file.."
+if ! $(grep -q -E "^${_param}\s+" ${opendmarc_conf_file} 2> /dev/null) ; then
+   cat << EOF >> ${opendmarc_conf_file}
+
+## Automatically re-start on failures. Use with caution; if the filter fails
+## instantly after it starts, this can cause a tight fork(2) loop.
+#
+AutoRestart false
+EOF
+   if [[ $? -eq 0 ]] ; then
+      echo_ok
+   else
+      echo_failed
+      error "$(cat $log_file)"
+   fi
+else
+   echo_skipped
+fi
+
+
+# - Add 'HistoryFile' with default value to the original opendmarc.conf file
+#
+_param="HistoryFile"
+echononl " Add '${_param}' with default value to the opendmarc.conf file.."
+if ! $(grep -q -E "^${_param}\s+" ${opendmarc_conf_file} 2> /dev/null) ; then
+   cat << EOF >> ${opendmarc_conf_file}
+
+## If set, specifies the location of a text file to which records are written
+## that can be used to generate DMARC aggregate reports. Records are batches of
+## rows containing information about a single received message, and include all
+## relevant information needed to generate a DMARC aggregate report. It is
+## expected that this will not be used in its raw form, but rather periodically
+## imported into a relational database from which the aggregate reports can be
+## extracted using opendmarc-importstats(8).
+#
+HistoryFile /run/opendmarc/opendmarc.dat
+EOF
+   if [[ $? -eq 0 ]] ; then
+      echo_ok
+   else
+      echo_failed
+      error "$(cat $log_file)"
+   fi
+else
+   echo_skipped
+fi
+
+
+# - Add 'SPFIgnoreResults' with default value to the original opendmarc.conf file
+#
+_param="SPFIgnoreResults"
+echononl " Add '${_param}' with default value to the opendmarc.conf file.."
+if ! $(grep -q -E "^${_param}\s+" ${opendmarc_conf_file} 2> /dev/null) ; then
+   cat << EOF >> ${opendmarc_conf_file}
+
+## Causes the filter to ignore any SPF results in the header of the message. This
+## is useful if you want the filter to perform SPF checks itself, or because you
+## don't trust the arriving header. The default is "false".
+#
+SPFIgnoreResults false
+EOF
+   if [[ $? -eq 0 ]] ; then
+      echo_ok
+   else
+      echo_failed
+      error "$(cat $log_file)"
+   fi
+else
+   echo_skipped
+fi
+
+
+# - Add 'SPFSelfValidate' with default value to the original opendmarc.conf file
+#
+_param="SPFSelfValidate"
+echononl " Add '${_param}' with default value to the opendmarc.conf file.."
+if ! $(grep -q -E "^${_param}\s+" ${opendmarc_conf_file} 2> /dev/null) ; then
+   cat << EOF >> ${opendmarc_conf_file}
+
+## Causes the filter to perform a fallback SPF check itself when it can find no
+## SPF results in the message header. If SPFIgnoreResults is also set, it never
+## looks for SPF results in headers and always performs the SPF check itself when
+## this is set. The default is "false".
+#
+SPFSelfValidate false
+EOF
+   if [[ $? -eq 0 ]] ; then
+      echo_ok
+   else
+      echo_failed
+      error "$(cat $log_file)"
+   fi
+else
+   echo_skipped
+fi
+
+
 # - Save configuration file from distribution
 # -
 echononl "   Save configuration file from distribution"