install/openvpn
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c1a50110a9
openvpn/install_openvpn.sh

2989 lines
80 KiB
Bash
Executable File
Raw Blame History

#!/usr/bin/env bash
script_dir="$(dirname $(realpath $0))"
conf_file=${script_dir}/conf/install_openvpn.conf
_needed_debian_packages="openvpn easy-rsa"
# - Used if system does NOT support systemd
# -
init_script="/etc/init.d/openvpn"
# - Used if systemd is supported
# -
service_name=openvpn
openvpn_binary="/usr/sbin/openvpn"
log_file="$(mktemp)"
_date="$(date +%Y-%m-%d-%H%M)"
#---------------------------------------
#-----------------------------
# Base Function(s)
#-----------------------------
#---------------------------------------
clean_up() {
# Perform program exit housekeeping
rm $log_file
blank_line
exit $1
}
trim() {
local var="$*"
var="${var#"${var%%[![:space:]]*}"}" # remove leading whitespace characters
var="${var%"${var##*[![:space:]]}"}" # remove trailing whitespace characters
echo -n "$var"
}
blank_line() {
if $terminal ; then
echo ""
fi
}
is_number() {
return $(test ! -z "${1##*[!0-9]*}" > /dev/null 2>&1);
# - also possible
# -
#[[ ! -z "${1##*[!0-9]*}" ]] && return 0 || return 1
#return $([[ ! -z "${1##*[!0-9]*}" ]])
}
is_int() {
return $(test "$@" -eq "$@" > /dev/null 2>&1);
}
# - Test of valid IPv4 Address
# -
# - Returns 0 if valid, > 0 otherwise
# -
is_valid_ipv4() {
local -a octets=( ${1//\./ } )
local RETURNVALUE=0
# return an error if the IP doesn't have exactly 4 octets
[[ ${#octets[@]} -ne 4 ]] && return 1
for octet in ${octets[@]}
do
if [[ ${octet} =~ ^[0-9]{1,3}$ ]]
then # shift number by 8 bits, anything larger than 255 will be > 0
((RETURNVALUE += octet>>8 ))
else # octet wasn't numeric, return error
return 1
fi
done
return ${RETURNVALUE}
}
# - Convert CIDR to netmask
# -
cidr2mask() {
local i mask=""
local full_octets=$(($1/8))
local partial_octet=$(($1%8))
for ((i=0;i<4;i+=1)); do
if [ $i -lt $full_octets ]; then
mask+=255
elif [ $i -eq $full_octets ]; then
mask+=$((256 - 2**(8-$partial_octet)))
else
mask+=0
fi
test $i -lt 3 && mask+=.
done
echo $mask
}
echononl(){
echo X\\c > /tmp/shprompt$$
if [ `wc -c /tmp/shprompt$$ | awk '{print $1}'` -eq 1 ]; then
echo -e -n "$*\\c" 1>&2
else
echo -e -n "$*" 1>&2
fi
rm /tmp/shprompt$$
}
fatal(){
echo ""
echo -e "\t[ \033[31m\033[1mFatal\033[m ]: $*"
echo ""
echo -e "\t\033[37m\033[1mInstalllation will be interrupted\033[m\033[m"
echo ""
clean_up 1
exit 1
}
error(){
echo ""
echo -e "\t[ \033[31m\033[1mError\033[m ]: $*"
echo ""
}
warn (){
echo ""
echo -e "\t[ \033[33m\033[1mWarning\033[m ]: $*"
echo ""
}
info (){
echo ""
echo -e "\t[ \033[32m\033[1mInfo\033[m ]: $*"
echo ""
}
echo_done() {
echo -e "\033[80G[ \033[32mdone\033[m ]"
}
echo_ok() {
echo -e "\033[80G[ \033[32mok\033[m ]"
}
echo_warning() {
echo -e "\033[80G[ \033[33m\033[1mwarn\033[m ]"
}
echo_failed(){
echo -e "\033[80G[ \033[1;31mfailed\033[m ]"
}
echo_skipped() {
echo -e "\033[80G[ \033[37mskipped\033[m ]"
}
detect_os_1 () {
if $(which lsb_release > /dev/null 2>&1) ; then
os_dist="$(lsb_release -i | awk '{print tolower($3)}')"
os_version="$(lsb_release -r | awk '{print tolower($2)}')"
os_codename="$(lsb_release -c | awk '{print tolower($2)}')"
if [[ "$os_dist" = "debian" ]]; then
if $(echo "$os_version" | grep -q '\.') ; then
os_version=$(echo "$os_version" | cut --delimiter='.' -f1)
fi
fi
elif [[ -e "/etc/os-release" ]]; then
. /etc/os-release
os_dist=$ID
os_version=${os_version_ID}
fi
# remove whitespace from os_dist and os_version
os_dist="${os_dist// /}"
os_version="${os_version// /}"
}
trap clean_up SIGHUP SIGINT SIGTERM
#---------------------------------------
#-----------------------------
# Check some prerequisites
#-----------------------------
#---------------------------------------
# - Is 'systemd' supported on this system
# -
systemd=$(which systemd)
systemctl=$(which systemctl)
systemd_supported=false
if [[ -n "$systemd" ]] && [[ -n "$systemctl" ]] ; then
systemd_supported=true
else
if [[ ! -x $init_script ]]; then
fatal "$(basename $0): Missing OpenVPN Init-Script!"
fi
fi
# - Set variable
# - os_dist
# - os_version
# - os_codename
# -
detect_os_1
clear
echo -e "\n\t\033[32mStart script for installation of OpenVPN on this Server..\033[m"
#---------------------------------------
#-----------------------------
# Setting Defaults
#-----------------------------
#---------------------------------------
DEFAULT_SERVER_PORT="1194 1195"
DEFAULT_OPENVPN_NAME="home gw-ckubu"
DEFAULT_CA_EXPIRE=11688
DEFAULT_CERT_EXPIRE=7305
DEFAULT_KEY_SIZE=4096
DEFAULT_KEY_COUNTRY="DE"
DEFAULT_KEY_PROVINCE="Berlin"
DEFAULT_KEY_CITY="Berlin"
DEFAULT_KEY_EMAIL='argus@oopen.de'
DEFAULT_KEY_ORG='o.open'
DEFAULT_KEY_OU="Network Services"
DEFAULT_SERVER_CIPHER="AES-256-CBC"
#---------------------------------------
#-----------------------------
# Load default values from install_openvpn.conf
#
# Overwrites the settings above
#
#-----------------------------
#---------------------------------------
echo ""
echo ""
echononl " Load Configuration File $(basename ${conf_file}).."
if [[ ! -f "$conf_file" ]]; then
echo_skipped
else
source "${conf_file}" > $log_file 2>&1
if [[ $? -eq 0 ]]; then
echo_ok
else
echo_failed
fatal "$(cat $log_file)"
fi
fi
[[ -z "$DEFAULT_SERVER_CIPHER" ]] && DEFAULT_SERVER_CIPHER='None'
[[ -n "$OPENVPN_SERVER" ]] && DEFAULT_SERVER="$(trim "$OPENVPN_SERVER")"
#[[ -n "$SERVER_PORT" ]] && DEFAULT_SERVER_PORT="$( trim "$SERVER_PORT")"
declare -a DEFAULT_SERVER_PORT_ARR=()
if [[ -n "$SERVER_PORT" ]] ; then
for _port in $SERVER_PORT ; do
DEFAULT_SERVER_PORT_ARR+=("$_port")
done
else
for _port in $DEFAULT_SERVER_PORT ; do
DEFAULT_SERVER_PORT_ARR+=("$_port")
done
fi
[[ -n "$ORG_SHORTCUT" ]] && DEFAULT_ORG_SHORTCUT="$(trim "$ORG_SHORTCUT")"
declare -a DEFAULT_OPENVPN_NAME_ARR=()
if [[ -n "$OPENVPN_NAME" ]] ; then
for _name in $OPENVPN_NAME ; do
DEFAULT_OPENVPN_NAME_ARR+=("$_name")
done
else
for _name in $DEFAULT_OPENVPN_NAME ; do
DEFAULT_OPENVPN_NAME_ARR+=("$_name")
done
fi
[[ -n "$OPENVPN_BASE_DIR" ]] && DEFAULT_OPENVPN_BASE_DIR="$OPENVPN_BASE_DIR"
[[ -n "$CA_EXPIRE" ]] && DEFAULT_CERT_EXPIRE="$(trim "$CA_EXPIRE")"
[[ -n "$KEY_PROVINCE" ]] && DEFAULT_KEY_PROVINCE="$(trim "$KEY_PROVINCE")"
[[ -n "$KEY_CITY" ]] && DEFAULT_KEY_CITY="$(trim "$KEY_CITY")"
[[ -n "$KEY_ORG" ]] && DEFAULT_KEY_ORG="$(trim "$KEY_ORG")"
[[ -n "$KEY_EMAIL" ]] && DEFAULT_KEY_EMAIL="$(trim "$KEY_EMAIL")"
[[ -n "$KEY_OU" ]] && DEFAULT_KEY_OU="$(trim "$KEY_OU")"
[[ -n "$LZO_COMPRESSION" ]] && DEFAULT_LZO_COMPRESSION="$(trim "$LZO_COMPRESSION")"
[[ -n "$SERVER_CIPHER" ]] && DEFAULT_SERVER_CIPHER="$(trim "$SERVER_CIPHER")"
#[[ -n "$" ]] && DEFAULT_="$(trim "$")"
declare -a DEFAULT_OPENVPN_NETWORK=()
if [[ -n "$OPENVPN_NETWORK" ]] ; then
for _net in $OPENVPN_NETWORK ; do
DEFAULT_OPENVPN_NETWORK_ARR+=("$_net")
done
fi
[[ -n "$REMOTE_NETWORKS" ]] && DEFAULT_REMOTE_NETWORKS="$(trim "$REMOTE_NETWORKS")"
[[ -n "$DNS_SERVER" ]] && DEFAULT_DNS_SERVER="$(trim "$DNS_SERVER")"
[[ -n "$SEARCH_DOMAINS" ]] && DEFAULT_SEARCH_DOMAINS="$(trim "$SEARCH_DOMAINS")"
[[ -n "$LOCAL_NETWORKS" ]] && DEFAULT_LOCAL_NETWORKS="$(trim "$LOCAL_NETWORKS")"
echo ""
echo ""
echo -e "\033[32m==========\033[m"
echo ""
echononl "Only create Configuration file (yes/no) [no]: "
read OK
echo ""
if [[ "$(trim ${OK,,})" = "yes" ]] ; then
_only_create_config_file=true
else
_only_create_config_file=false
fi
echo ""
echo ""
echo -e "\033[32m--\033[m"
echo "Common parameters"
echo -e "\033[32m--\033[m"
echo ""
echo "Insert IP-Address/Hostname of OpenVPN Server"
echo ""
OPENVPN_SERVER=""
if [[ -n "$DEFAULT_SERVER" ]] ; then
echononl "OpenVPN Server [${DEFAULT_SERVER}]: "
read OPENVPN_SERVER
if [[ "X$OPENVPN_SERVER" = "X" ]]; then
OPENVPN_SERVER="$DEFAULT_SERVER"
fi
else
echononl "OpenVPN Server: "
read OPENVPN_SERVER
while [ "X$OPENVPN_SERVER" = "X" ] ; do
echo -e "\n\t\033[33m\033[1mSetting 'OpenVPN Server' is required!\033[m\n"
echononl "OpenVPN Server: "
read OPENVPN_SERVER
done
fi
echo ""
SERVER_PORT=""
#echononl "Server Port [${DEFAULT_SERVER_PORT}]: "
#while [[ "X${SERVER_PORT}" = "X" ]]; do
# read SERVER_PORT
# if [[ "X$SERVER_PORT" = "X" ]]; then
# SERVER_PORT="$DEFAULT_SERVER_PORT"
# fi
#done
declare -i i=0
echo ""
echo "Which Server Port should be used:"
echo ""
for _port in "${DEFAULT_SERVER_PORT_ARR[@]}" ; do
echo " [${i}] ${DEFAULT_SERVER_PORT_ARR[${i}]}"
(( i++ ))
done
echo ""
echo " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ -n ${DEFAULT_SERVER_PORT_ARR[$_IN]} ]]; then
SERVER_PORT="${DEFAULT_SERVER_PORT_ARR[$_IN]}"
_OK=true
elif is_number "$_IN" && [[ $_IN -eq $i ]]; then
echo ""
echononl "Server Port: "
read SERVER_PORT
while [[ "X${SERVER_PORT}" = "X" ]]; do
echo -e "\n\t\033[33m\033[1mSetting 'Server Port' is required!\033[m\n"
echononl "Server Port: "
read SERVER_PORT
done
_OK=true
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi
done
if $(grep -q -E "SERVER_PORT=$SERVER_PORT" ${script_dir}/conf/server-*.conf 2> /dev/null) ; then
warn "Port '$SERVER_PORT' is already in use by an other OpenVPN Service on this Server"
fi
echo ""
echo "Insert shortcut (acronym) for the company or organisation"
echo ""
echo " Example: 'AKB' or 'FLR' or 'OPP' or.."
echo ""
ORG_SHORTCUT=""
echononl "Organisations shortcut: "
if [[ -n "$DEFAULT_ORG_SHORTCUT" ]] ; then
echononl "Organisations shortcut [${DEFAULT_ORG_SHORTCUT}]: "
read ORG_SHORTCUT
if [[ "X$ORG_SHORTCUT" = "X" ]]; then
ORG_SHORTCUT="$DEFAULT_ORG_SHORTCUT"
fi
else
echononl "Organisations shortcut: "
read ORG_SHORTCUT
while [ "X$ORG_SHORTCUT" = "X" ] ; do
echo -e "\n\t\033[33m\033[1mSetting 'OpenVPN Name' is required!\033[m\n"
echononl "Organisations shortcut: "
read ORG_SHORTCUT
done
fi
DEFAULT_KEY_NAME="VPN $ORG_SHORTCUT"
DEFAULT_KEY_CN="VPN-$ORG_SHORTCUT"
DEFAULT_KEY_ALTNAMES="VPN $ORG_SHORTCUT"
#echo ""
#echo "Insert Name of OpenVPN Service (i.e. so36, gw-ckubu, opferperspektive)"
#echo ""
#echo " Example: 'so36' or 'gw-ckubu' or 'opferperspektive' or.."
#echo ""
#OPENVPN_NAME=""
#echononl "OpenVPN Name: "
#read OPENVPN_NAME
#while [ "X$OPENVPN_NAME" = "X" ] ; do
# echo -e "\n\t\033[33m\033[1mSetting 'OpenVPN Name' is required!\033[m\n"
# echononl "OpenVPN Name: "
# read OPENVPN_NAME
#done
OPENVPN_NAME=""
declare -i i=0
echo ""
echo "Select Name of OpenVPN Service"
echo ""
for _port in "${DEFAULT_OPENVPN_NAME_ARR[@]}" ; do
echo " [${i}] ${DEFAULT_OPENVPN_NAME_ARR[${i}]}"
(( i++ ))
done
echo ""
echo " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ -n ${DEFAULT_OPENVPN_NAME_ARR[$_IN]} ]]; then
OPENVPN_NAME="${DEFAULT_OPENVPN_NAME_ARR[$_IN]}"
_OK=true
elif is_number "$_IN" && [[ $_IN -eq $i ]]; then
echo ""
echo "Give Name of OpenVPN Service (i.e. home, so36, gw-ckubu, opferperspektive, opp)"
echo ""
echononl "Name of OpenVPN Service: "
read OPENVPN_NAME
while [[ "X${OPENVPN_NAME}" = "X" ]]; do
echo -e "\n\t\033[33m\033[1mSetting 'Name of OpenVPN Service' is required!\033[m\n"
echononl "Name of OpenVPN Service: "
read OPENVPN_NAME
done
_OK=true
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi
done
[[ -z "$DEFAULT_OPENVPN_BASE_DIR" ]] && DEFAULT_OPENVPN_BASE_DIR="/etc/openvpn/server/${OPENVPN_NAME}"
echo ""
echo ""
echo "Insert OpenVPN Base Directory for Service '$OPENVPN_NAME'"
echo ""
if ! $_only_create_config_file ; then
echo " Note: must be a subdirectory of '/etc/openvpn'"
echo ""
fi
OPENVPN_BASE_DIR=""
echononl "OpenVPN Base Directory [${DEFAULT_OPENVPN_BASE_DIR}]: "
while [[ "X${OPENVPN_BASE_DIR}" = "X" ]]; do
read OPENVPN_BASE_DIR
if [[ "X$OPENVPN_BASE_DIR" = "X" ]]; then
OPENVPN_BASE_DIR="$DEFAULT_OPENVPN_BASE_DIR"
else
if [[ ! "$(dirname ${OPENVPN_BASE_DIR})" = "/etc/openvpn" ]] && ! $_only_create_config_file ; then
echo -e "\n\t\033[33m\033[1mGiven entry is NOT a subdirectory of '/etc/openvpn'. Retry..\033[m\n"
echononl "OpenVPN Base Directory [${DEFAULT_OPENVPN_BASE_DIR}]: "
OPENVPN_BASE_DIR=""
fi
fi
done
EASY_RSA_DIR="${OPENVPN_BASE_DIR}/easy-rsa"
if [[ "$os_dist" = "debian" ]] && [[ $os_version -gt 9 ]] ; then
OPENVPN_KEY_DIR="${OPENVPN_BASE_DIR}/pki"
OPENVPN_CCD_DIR="${OPENVPN_BASE_DIR}/ccd"
else
OPENVPN_KEY_DIR="${OPENVPN_BASE_DIR}/keys"
OPENVPN_CCD_DIR="${OPENVPN_BASE_DIR}/ccd/server-${OPENVPN_NAME}"
fi
echo ""
echo -e "\033[32m--\033[m"
echo "KEY generation parameters"
echo -e "\033[32m--\033[m"
echo ""
echo "Insert expiration time for ROOT CA"
echo ""
echo " Example: (3*365+366)*8 = 11688 = 32 Jahre"
echo " expiration time: 11688"
echo ""
CA_EXPIRE=""
echononl "Expiration time ROOT CA [${DEFAULT_CA_EXPIRE}]: "
while [[ "X${CA_EXPIRE}" = "X" ]]; do
read CA_EXPIRE
if [[ "X$CA_EXPIRE" = "X" ]]; then
CA_EXPIRE="$DEFAULT_CA_EXPIRE"
fi
done
echo ""
echo ""
echo "Insert expiration time for user/server certificates"
echo ""
echo " Example: (3*365+366)*5 = 7305 = 20 Jahre"
echo " expiration time: 7305"
echo ""
CERT_EXPIRE=""
echononl "Expiration time certificates [${DEFAULT_CERT_EXPIRE}]: "
while [[ "X${CERT_EXPIRE}" = "X" ]]; do
read CERT_EXPIRE
if [[ "X$CERT_EXPIRE" = "X" ]]; then
CERT_EXPIRE="$DEFAULT_CERT_EXPIRE"
fi
done
echo ""
echo ""
echo "Insert key size for user/server keys"
echo ""
KEY_SIZE=""
echononl "KEY_SIZE [${DEFAULT_KEY_SIZE}]: "
while [[ "X${KEY_SIZE}" = "X" ]]; do
read KEY_SIZE
if [[ "X$KEY_SIZE" = "X" ]]; then
KEY_SIZE="$DEFAULT_KEY_SIZE"
fi
done
echo ""
echo ""
echo "Insert key meta-data"
echo ""
KEY_COUNTRY=""
echononl "KEY_COUNTRY [${DEFAULT_KEY_COUNTRY}]: "
read KEY_COUNTRY
if [[ "X$KEY_COUNTRY" = "X" ]]; then
KEY_COUNTRY="$DEFAULT_KEY_COUNTRY"
fi
KEY_PROVINCE=""
echo ""
echononl "KEY_PROVINCE [${DEFAULT_KEY_PROVINCE}]: "
read KEY_PROVINCE
if [[ "X$KEY_PROVINCE" = "X" ]]; then
KEY_PROVINCE="$DEFAULT_KEY_PROVINCE"
fi
KEY_CITY=""
echo ""
echononl "KEY_CITY [${DEFAULT_KEY_CITY}]: "
read KEY_CITY
if [[ "X$KEY_CITY" = "X" ]]; then
KEY_CITY="$DEFAULT_KEY_CITY"
fi
KEY_ORG=""
echo ""
echononl "KEY_ORG [${DEFAULT_KEY_ORG}]: "
read KEY_ORG
if [[ "X$KEY_ORG" = "X" ]]; then
KEY_ORG="$DEFAULT_KEY_ORG"
fi
KEY_EMAIL=""
echo ""
echononl "KEY_EMAIL [${DEFAULT_KEY_EMAIL}]: "
read KEY_EMAIL
if [[ "X$KEY_EMAIL" = "X" ]]; then
KEY_EMAIL="$DEFAULT_KEY_EMAIL"
fi
EMAIL_PREFIX="$(echo $KEY_EMAIL | cut -d '@' -f1)"
EMAIL_DOMAIN="$(echo $KEY_EMAIL | cut -d '@' -f2)"
KEY_OU=""
echo ""
echononl "KEY_OU [${DEFAULT_KEY_OU}]: "
read KEY_OU
if [[ "X$KEY_OU" = "X" ]]; then
KEY_OU="$DEFAULT_KEY_OU"
fi
KEY_NAME=
echo ""
echononl "KEY_NAME [${DEFAULT_KEY_NAME}]: "
read KEY_NAME
if [[ "X$KEY_NAME" = "X" ]]; then
KEY_NAME="$DEFAULT_KEY_NAME"
else
DEFAULT_KEY_CN="$KEY_NAME"
DEFAULT_KEY_ALTNAMES="$KEY_NAME"
fi
KEY_CN=""
echo ""
echo ""
echo -e " Type \"\033[33mNone\033[m\" if no CN Prefix should be used"
echo ""
echononl "KEY_CN [${DEFAULT_KEY_CN}]: "
read KEY_CN
if [[ "X$KEY_CN" = "X" ]]; then
KEY_CN="$DEFAULT_KEY_CN"
DEFAULT_KEY_ALTNAMES="$KEY_CN"
else
DEFAULT_KEY_ALTNAMES="$KEY_CN"
if [[ "$(trim ${KEY_CN,,})" = 'none' ]] ; then
KEY_CN=""
fi
fi
KEY_ALTNAMES=""
echo ""
echononl "KEY_ALTNAMES [${DEFAULT_KEY_ALTNAMES}]: "
read KEY_ALTNAMES
if [[ "X$KEY_ALTNAMES" = "X" ]]; then
KEY_ALTNAMES="$DEFAULT_KEY_ALTNAMES"
fi
if [[ "$(trim ${KEY_ALTNAMES,,})" = 'none' ]] ; then
KEY_ALTNAMES=""
fi
echo ""
echo -e "\033[32m--\033[m"
echo "Parameters for Server Configurations"
echo -e "\033[32m--\033[m"
echo ""
echo "Set server-side 'cryptographic cipher'."
echo ""
echo "Note: if setting this parameter at the server configuration, this parameter *must'"
echo " also set this parameter at client configuration"
echo ""
echo " cipher BF-CBC # Blowfish (default)"
echo " cipher AES-128-CBC # AES 128Bit"
echo " cipher AES-256-CBC # AES 256Bit"
echo " cipher DES-EDE3-CBC # Triple-DES"
echo " ..."
echo ""
echo -e "Type \"\033[33mNone\033[m\" if no default cipher should be set."
echo ""
SERVER_CIPHER=""
echononl "Server cryptographic cipher [${DEFAULT_SERVER_CIPHER}]: "
read SERVER_CIPHER
if [[ "X$SERVER_CIPHER" = "X" ]]; then
SERVER_CIPHER="$DEFAULT_SERVER_CIPHER"
fi
if [[ "$(trim ${SERVER_CIPHER,,})" = none ]]; then
SERVER_CIPHER="$DEFAULT_SERVER_CIPHER"
fi
echo ""
echo ""
echononl "Enable LZO compression (yes/no) [no]: "
read OK
echo ""
if [[ "$(trim ${OK,,})" = "yes" ]] ; then
LZO_COMPRESSION=true
else
LZO_COMPRESSION=false
fi
#echo ""
#echo "Set OpenVPN Network used for the connection."
#echo ""
#OPENVPN_NETWORK=""
#echononl "OpenVPN Network: "
#read OPENVPN_NETWORK
#while [ "X$OPENVPN_NETWORK" = "X" ] ; do
# echo -e "\n\t\033[33m\033[1mSetting 'OpenVPN Server' is required!\033[m\n"
# echononl "OpenVPN Network: "
# read OPENVPN_NETWORK
#done
#OPENVPN_SERVER_IP="${OPENVPN_NETWORK%.*}.1"
OPENVPN_NETWORK=""
declare -i i=0
echo ""
echo "Select OpenVPN Network used for the connection."
echo ""
for _port in "${DEFAULT_OPENVPN_NETWORK_ARR[@]}" ; do
echo " [${i}] ${DEFAULT_OPENVPN_NETWORK_ARR[${i}]}"
(( i++ ))
done
if [[ $i -eq 0 ]] ; then
echononl "OpenVPN Network: "
read OPENVPN_NETWORK
while [ "X$OPENVPN_NETWORK" = "X" ] ; do
echo -e "\n\t\033[33m\033[1mSetting 'OpenVPN Server' is required!\033[m\n"
echononl "OpenVPN Network: "
read OPENVPN_NETWORK
done
else
echo ""
echo " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ -n ${DEFAULT_OPENVPN_NETWORK_ARR[$_IN]} ]]; then
OPENVPN_NETWORK="${DEFAULT_OPENVPN_NETWORK_ARR[$_IN]}"
_OK=true
elif is_number "$_IN" && [[ $_IN -eq $i ]]; then
echo ""
echo "Give Name of OpenVPN Service (i.e. home, so36, gw-ckubu, opferperspektive, opp)"
echo ""
echononl "Name of OpenVPN Service: "
read OPENVPN_NETWORK
while [[ "X${OPENVPN_NETWORK}" = "X" ]]; do
echo -e "\n\t\033[33m\033[1mSetting 'Name of OpenVPN Service' is required!\033[m\n"
echononl "Name of OpenVPN Service: "
read OPENVPN_NETWORK
done
_OK=true
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi
done
fi
OPENVPN_SERVER_IP="${OPENVPN_NETWORK%.*}.1"
echo ""
echo -e "\033[32m--\033[m"
echo ""
echo ""
echo "Networks to push from OpenVPN server to the client"
echo ""
declare -i i=0
REMOTE_NETWORKS=""
declare -a REMOTE_NETWORK_ARR=()
if [[ -z "$DEFAULT_REMOTE_NETWORKS" ]] || [[ "$(trim ${DEFAULT_REMOTE_NETWORKS,,})" = none ]]; then
echo -e "[${i}] \033[33mNone\033[m"
(( i++ ))
echo ""
echo -e "[${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
if [[ $_IN -eq 0 ]] ; then
REMOTE_NETWORKS=""
_OK=true
else
echo ""
echo "Networks to push from OpenVPN server to the client"
echo ""
echo " - use CIDR notation"
echo " - multiple networks are possible: use blank separated list of CIDR-networks"
echo -e " - \"\033[33mNone\033[m\" if no network should be pushed from OpenVPN server."
echo ""
echononl "Networks to push from server: "
while [[ "X$REMOTE_NETWORKS" = "X" ]] ; do
read REMOTE_NETWORKS
_to_lower_remote_networks="$(trim ${REMOTE_NETWORKS,,})"
if [[ "$_to_lower_remote_networks" = "none" ]]; then
REMOTE_NETWORKS=""
break
fi
if [[ "X$REMOTE_NETWORKS" = "X" ]] ; then
echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
echononl "Networks to push from server: "
continue
fi
for _net in ${REMOTE_NETWORKS} ; do
IFS='/' read -a _net_arr <<< "${_net}"
if ! is_valid_ipv4 ${_net_arr[0]} ; then
REMOTE_NETWORKS=""
REMOTE_NETWORK_ARR=()
echo -e "\n\t\033[33m\033[1mNo valid network(s) given!\033[m\n"
echononl "Networks to push from server: "
break
fi
REMOTE_NETWORK_ARR+=("$_net")
done
done
_OK=true
fi
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi
done
else
echo -e "[${i}] $DEFAULT_REMOTE_NETWORKS"
(( i++ ))
echo -e "[${i}] \033[33mNone\033[m"
(( i++ ))
echo ""
echo -e "[${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ $_IN -lt 3 ]]; then
if [[ $_IN -eq 0 ]] ; then
REMOTE_NETWORKS="$DEFAULT_REMOTE_NETWORKS"
for _net in ${REMOTE_NETWORKS} ; do
IFS='/' read -a _net_arr <<< "${_net}"
if ! is_valid_ipv4 ${_net_arr[0]} ; then
REMOTE_NETWORKS=""
REMOTE_NETWORK_ARR=()
echo -e "\n\t\033[33m\033[1mNo valid network(s) given!\033[m\n"
echononl "Networks to push from server: "
break
fi
REMOTE_NETWORK_ARR+=("$_net")
done
_OK=true
elif [[ $_IN -eq 1 ]] ; then
REMOTE_NETWORKS=""
_OK=true
else
echo ""
echo "Networks to push from OpenVPN server to the client"
echo ""
echo " - use CIDR notation"
echo " - multiple networks are possible: use blank separated list of CIDR-networks"
echo -e " - \"\033[33mNone\033[m\" if no network should be pushed from OpenVPN server."
echo ""
echononl "Networks to push from server: "
while [[ "X$REMOTE_NETWORKS" = "X" ]] ; do
read REMOTE_NETWORKS
_to_lower_remote_networks="$(trim ${REMOTE_NETWORKS,,})"
if [[ "$_to_lower_remote_networks" = "none" ]]; then
REMOTE_NETWORKS=""
break
fi
if [[ "X$REMOTE_NETWORKS" = "X" ]] ; then
echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
echononl "Networks to push from server: "
continue
fi
for _net in ${REMOTE_NETWORKS} ; do
IFS='/' read -a _net_arr <<< "${_net}"
if ! is_valid_ipv4 ${_net_arr[0]} ; then
REMOTE_NETWORKS=""
REMOTE_NETWORK_ARR=()
echo -e "\n\t\033[33m\033[1mNo valid network(s) given!\033[m\n"
echononl "Networks to push from server: "
break
fi
REMOTE_NETWORK_ARR+=("$_net")
done
done
_OK=true
fi # if [[ $_IN -eq 0 ]] ; then
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi # if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
done
fi
#REMOTE_NETWORKS=""
#declare -a REMOTE_NETWORK_ARR=()
#echononl "Networks to push from server: "
#while [[ "X$REMOTE_NETWORKS" = "X" ]] ; do
# read REMOTE_NETWORKS
# _to_lower_remote_networks="$(trim ${REMOTE_NETWORKS,,})"
# if [[ "$_to_lower_remote_networks" = "none" ]]; then
# REMOTE_NETWORKS=""
# break
# fi
# if [[ "X$REMOTE_NETWORKS" = "X" ]] ; then
# echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
# echononl "Networks to push from server: "
# continue
# fi
#
# for _net in ${REMOTE_NETWORKS} ; do
# IFS='/' read -a _net_arr <<< "${_net}"
# if ! is_valid_ipv4 ${_net_arr[0]} ; then
# REMOTE_NETWORKS=""
# REMOTE_NETWORK_ARR=()
# echo -e "\n\t\033[33m\033[1mNo valid network(s) given!\033[m\n"
# echononl "Networks to push from server: "
# break
# fi
# REMOTE_NETWORK_ARR+=("$_net")
# done
#done
echo ""
echo -e "\033[32m--\033[m"
echo ""
declare -i i=0
echo ""
echo "IP-Address of DNS server to push from OpenVPN server to the client."
echo ""
if [[ -z "$DEFAULT_DNS_SERVER" ]] || [[ "$(trim ${DEFAULT_DNS_SERVER,,})" = "none" ]]; then
echo -e " [${i}] \033[33mNone\033[m"
(( i++ ))
echo ""
echo -e " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
if [[ $_IN -eq 0 ]] ; then
DNS_SERVER=""
_OK=true
else
echo "IP-Address of DNS server to push from OpenVPN server to the client."
echo ""
echo -e "Type \"\033[33mNone\033[m\" if no DNS Server should be pushed."
echo ""
DNS_SERVER=""
echononl "DNS server to push to clients: "
while [[ "X$DNS_SERVER" = "X" ]]; do
read DNS_SERVER
if [[ "X$DNS_SERVER" = "X" ]]; then
echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
echononl "DNS server to pusch to clients"
continue
else
_to_lower_dns_server="$(trim ${DNS_SERVER,,})"
if [[ "$_to_lower_dns_server" = "none" ]]; then
DNS_SERVER=""
break;
fi
fi
done
_OK=true
fi # if [[ $_IN -eq 0 ]] ; then
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi # if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
done # while ! $_OK ; do
else
echo -e " [${i}] $DEFAULT_DNS_SERVER"
(( i++ ))
echo -e " [${i}] \033[33mNone\033[m"
(( i++ ))
echo ""
echo -e " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ $_IN -lt 3 ]]; then
if [[ $_IN -eq 0 ]] ; then
DNS_SERVER="$DEFAULT_DNS_SERVER"
_OK=true
elif [[ $_IN -eq 1 ]] ; then
DNS_SERVER=""
_OK=true
else
echo "IP-Address of DNS server to push from OpenVPN server to the client."
echo ""
echo -e "Type \"\033[33mNone\033[m\" if no DNS Server should be pushed."
echo ""
DNS_SERVER=""
echononl "DNS server to push to clients: "
while [[ "X$DNS_SERVER" = "X" ]]; do
read DNS_SERVER
if [[ "X$DNS_SERVER" = "X" ]]; then
echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
echononl "DNS server to pusch to clients"
continue
else
_to_lower_dns_server="$(trim ${DNS_SERVER,,})"
if [[ "$_to_lower_dns_server" = "none" ]]; then
DNS_SERVER=""
break;
fi
fi
done
_OK=true
fi # if [[ $_IN -eq 0 ]] ; then
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi # if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
done # while ! $_OK ; do
fi # if [[ -z "$DEFAULT_DNS_SERVER" ]] || [[ "$(trim ${DNS_SERVER,,})" = "none" ]]; then
#echo "IP-Address of DNS server to push from OpenVPN server to the client."
#echo ""
#echo -e "Type \"\033[33mNone\033[m\" if no DNS Server should be pushed."
#echo ""
#DNS_SERVER=""
#echononl "DNS server to push to clients: "
#while [[ "X$DNS_SERVER" = "X" ]]; do
# read DNS_SERVER
# if [[ "X$DNS_SERVER" = "X" ]]; then
# echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
# echononl "DNS server to pusch to clients"
# continue
# else
# _to_lower_dns_server="$(trim ${DNS_SERVER,,})"
# if [[ "$_to_lower_dns_server" = "none" ]]; then
# DNS_SERVER=""
# break;
# fi
# fi
#done
echo ""
echo -e "\033[32m--\033[m"
echo ""
declare -i i=0
SEARCH_DOMAINS=""
echo ""
echo "Select Search Domain(s) to push from OpenVPN server to the client."
echo ""
if [[ -z "$DEFAULT_SEARCH_DOMAINS" ]] || [[ "$(trim ${DEFAULT_SEARCH_DOMAINS,,})" = "none" ]]; then
echo -e " [${i}] \033[33mNone\033[m"
(( i++ ))
echo ""
echo -e " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
if [[ $_IN -eq 0 ]] ; then
SEARCH_DOMAINS=""
_OK=true
else
SEARCH_DOMAINS=""
echononl "Default Domain to push to clients: "
while [[ "X$SEARCH_DOMAINS" = "X" ]]; do
read SEARCH_DOMAINS
if [[ "X$SEARCH_DOMAINS" = "X" ]]; then
echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
echononl "Search Domain(s) to pusch to clients"
continue
else
_to_lower_search_domains="$(trim ${SEARCH_DOMAINS,,})"
if [[ "$_to_lower_search_domains" = "none" ]]; then
SEARCH_DOMAINS=""
break;
fi
fi
done
_OK=true
echo ""
echo "SEARCH_DOMAINS: $SEARCH_DOMAINS"
echo ""
fi # if [[ $_IN -eq 0 ]] ; then
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi # if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
done #while ! $_OK ; do
else
echo -e " [${i}] $DEFAULT_SEARCH_DOMAINS"
(( i++ ))
echo -e " [${i}] \033[33mNone\033[m"
(( i++ ))
echo ""
echo -e " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ $_IN -lt 3 ]]; then
if [[ $_IN -eq 0 ]] ; then
SEARCH_DOMAINS="$DEFAULT_SEARCH_DOMAINS"
_OK=true
elif [[ $_IN -eq 1 ]] ; then
SEARCH_DOMAINS=""
_OK=true
else
echo ""
echo "Search Domain(s) to push from OpenVPN server to the client."
echo ""
echo " - multiple domains are possible: use blank separated list of search domains"
echo -e " - Type \"\033[33mNone\033[m\" if no default domain should be pushed."
echo ""
SEARCH_DOMAINS=""
echononl "Default Domain to push to clients: "
while [[ "X$SEARCH_DOMAINS" = "X" ]]; do
read SEARCH_DOMAINS
if [[ "X$SEARCH_DOMAINS" = "X" ]]; then
echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
echononl "Search Domain(s) to pusch to clients"
continue
else
_to_lower_search_domains="$(trim ${SEARCH_DOMAINS,,})"
if [[ "$_to_lower_search_domains" = "none" ]]; then
SEARCH_DOMAINS=""
break;
fi
fi
done
_OK=true
fi # if [[ $_IN -eq 0 ]] ; then
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi # if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
done #while ! $_OK ; do
fi # if [[ -z "$DEFAULT_SEARCH_DOMAINS" ]] || [[ "$(trim ${SEARCH_DOMAINS,,})" = none ]]
for _domain in ${SEARCH_DOMAINS} ; do
SEARCH_DOMAINS_ARR+=("$_domain")
done
#SEARCH_DOMAINS=""
#echononl "Default Domain to push to clients: "
#while [[ "X$SEARCH_DOMAINS" = "X" ]]; do
# read SEARCH_DOMAINS
# if [[ "X$SEARCH_DOMAINS" = "X" ]]; then
# echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
# echononl "Search Domain(s) to pusch to clients"
# continue
# else
# _to_lower_search_domains="$(trim ${SEARCH_DOMAINS,,})"
# if [[ "$_to_lower_search_domains" = "none" ]]; then
# SEARCH_DOMAINS=""
# break;
# fi
# fi
#done
#declare -a SEARCH_DOMAINS_ARR=()
#for _domain in ${SEARCH_DOMAINS} ; do
# SEARCH_DOMAINS_ARR+=("$_domain")
#done
echo ""
echo -e "\033[32m--\033[m"
echo ""
echo ""
echo "Local client networks to route through OpenVPN line."
echo ""
declare -i i=0
LOCAL_NETWORKS=""
declare -a LOCAL_NETWORK_ARR=()
if [[ -z "$DEFAULT_LOCAL_NETWORKS" ]] || [[ "$(trim ${DEFAULT_LOCAL_NETWORKS,,})" = none ]]; then
echo -e " [${i}] \033[33mNone\033[m"
(( i++ ))
echo ""
echo -e " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
if [[ $_IN -eq 0 ]] ; then
LOCAL_NETWORKS=""
_OK=true
else
echo ""
echo "Give client networks to route through OpenVPN line."
echo ""
echo " - use CIDR notation"
echo " - multiple networks are possible: use blank separated list of CIDR-networks"
echo -e " - \"\033[33mNone\033[m\" if no local client network should routed through OpenVPN line."
echo ""
echononl "Client Networks routed through VPN line: "
while [[ "X$LOCAL_NETWORKS" = "X" ]] ; do
read LOCAL_NETWORKS
_to_lower_local_networks="$(trim ${LOCAL_NETWORKS,,})"
if [[ "$_to_lower_local_networks" = "none" ]]; then
LOCAL_NETWORKS=""
break
fi
if [[ "X$LOCAL_NETWORKS" = "X" ]] ; then
echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
echononl "Client Networks routed through VPN line: "
continue
fi
for _net in ${LOCAL_NETWORKS} ; do
IFS='/' read -a _net_arr <<< "${_net}"
if ! is_valid_ipv4 ${_net_arr[0]} ; then
LOCAL_NETWORKS=""
LOCAL_NETWORK_ARR=()
echo -e "\n\t\033[33m\033[1mNo valid network(s) given!\033[m\n"
echononl "Client Networks routed through VPN line: "
break
fi
LOCAL_NETWORK_ARR+=("$_net")
done
done
_OK=true
fi
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi
done
else
echo -e " [${i}] $DEFAULT_LOCAL_NETWORKS"
(( i++ ))
echo -e " [${i}] \033[33mNone\033[m"
(( i++ ))
echo ""
echo -e " [${i}] other"
_OK=false
echo ""
echononl "Eingabe: "
while ! $_OK ; do
read _IN
if is_number "$_IN" && [[ $_IN -lt 3 ]]; then
if [[ $_IN -eq 0 ]] ; then
LOCAL_NETWORKS="$DEFAULT_LOCAL_NETWORKS"
for _net in ${LOCAL_NETWORKS} ; do
IFS='/' read -a _net_arr <<< "${_net}"
if ! is_valid_ipv4 ${_net_arr[0]} ; then
LOCAL_NETWORKS=""
LOCAL_NETWORK_ARR=()
echo -e "\n\t\033[33m\033[1mNo valid network(s) given!\033[m\n"
echononl "Client Networks routed through VPN line: "
break
fi
LOCAL_NETWORK_ARR+=("$_net")
done
_OK=true
elif [[ $_IN -eq 1 ]] ; then
LOCAL_NETWORKS=""
_OK=true
else
echo ""
echo "Give client networks to route through OpenVPN line."
echo ""
echo " - use CIDR notation"
echo " - multiple networks are possible: use blank separated list of CIDR-networks"
echo -e " - \"\033[33mNone\033[m\" if no local client network should routed through OpenVPN line."
echo ""
echononl "Client Networks routed through VPN line: "
while [[ "X$LOCAL_NETWORKS" = "X" ]] ; do
read LOCAL_NETWORKS
_to_lower_local_networks="$(trim ${LOCAL_NETWORKS,,})"
if [[ "$_to_lower_local_networks" = "none" ]]; then
LOCAL_NETWORKS=""
break
fi
if [[ "X$LOCAL_NETWORKS" = "X" ]] ; then
echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
echononl "Client Networks routed through VPN line: "
continue
fi
for _net in ${LOCAL_NETWORKS} ; do
IFS='/' read -a _net_arr <<< "${_net}"
if ! is_valid_ipv4 ${_net_arr[0]} ; then
LOCAL_NETWORKS=""
LOCAL_NETWORK_ARR=()
echo -e "\n\t\033[33m\033[1mNo valid network(s) given!\033[m\n"
echononl "Client Networks routed through VPN line: "
break
fi
LOCAL_NETWORK_ARR+=("$_net")
done
done
_OK=true
fi # if [[ $_IN -eq 0 ]] ; then
else
echo ""
echo -e "\tFalsche Eingabe !"
echo ""
echononl "Eingabe: "
fi # if is_number "$_IN" && [[ $_IN -lt 2 ]]; then
done
fi
#LOCAL_NETWORKS=""
#declare -a LOCAL_NETWORK_ARR=()
#echononl "Local networks to route through OpenVPN line: "
#while [[ "X$LOCAL_NETWORKS" = "X" ]] ; do
# read LOCAL_NETWORKS
# _to_lower_local_networks="$(trim ${LOCAL_NETWORKS,,})"
# if [[ "$_to_lower_local_networks" = "none" ]]; then
# LOCAL_NETWORKS=""
# break
# fi
# if [[ "X$LOCAL_NETWORKS" = "X" ]] ; then
# echo -e "\n\t\033[33m\033[1mWrong Entry!\033[m\n"
# echononl "Local networks to route through OpenVPN line: "
# continue
# fi
#
# for _net in ${LOCAL_NETWORKS} ; do
# IFS='/' read -a _net_arr <<< "${_net}"
# if ! is_valid_ipv4 ${_net_arr[0]} ; then
# LOCAL_NETWORKS=""
# LOCAL_NETWORK_ARR=()
# echo -e "\n\t\033[33m\033[1mNo valid network(s) given!\033[m\n"
# echononl "Local networks to route through OpenVPN line: "
# break
# fi
# LOCAL_NETWORK_ARR+=("$_net")
# done
#done
echo ""
echo ""
if $_only_create_config_file ; then
echo -e "\033[1;32mCreate Configuration file for OpenVPN service \033[1;37m$OPENVPN_NAME\033[m "
else
echo -e "\033[1;32mSettings for installation of \033[1;37mOpenVPN\033[m"
fi
echo ""
echo -e "\tOpenVPN IP-Address/Hostname.........: $OPENVPN_SERVER"
echo -e "\tOpenVPN Server.Port.................: $SERVER_PORT"
echo ""
echo -e "\tOrganisation shortcut...............: $ORG_SHORTCUT"
echo ""
echo -e "\tOpenVPN Service Name................: $OPENVPN_NAME"
echo -e "\tOpenVPN Base Directory..............: $OPENVPN_BASE_DIR"
echo -e "\tOpenVPN 'easy-rsa' Directory........: $EASY_RSA_DIR"
echo -e "\tOpenVPN 'key' Directory.............: $OPENVPN_KEY_DIR"
echo -e "\tOpenVPN 'ccd' Directory.............: $OPENVPN_CCD_DIR"
echo ""
echo -e "\tExpiration time ROOT CA.............: $CA_EXPIRE"
echo -e "\tExpiration time certificates........: $CERT_EXPIRE"
echo -e "\tKey size............................: $KEY_SIZE"
echo ""
echo -e "\tKEY_COUNTRY.........................: $KEY_COUNTRY"
echo -e "\tKEY_PROVINCE........................: $KEY_PROVINCE"
echo -e "\tKEY_CITY............................: $KEY_CITY"
echo -e "\tKEY_ORG.............................: $KEY_ORG"
echo -e "\tKEY_EMAIL...........................: $KEY_EMAIL"
echo -e "\tKEY_OU..............................: $KEY_OU"
echo ""
echo -e "\tKEY_NAME............................: $KEY_NAME"
if [[ -n "$KEY_CN" ]] ; then
echo -e "\tKEY_CN (Prefix).....................: $KEY_CN"
else
echo -e "\tKEY_CN (Prefix).....................: \033[33mNone\033[m"
fi
echo ""
if [[ -n "$KEY_ALTNAMES" ]] ; then
echo -e "\tKEY_ALTNAMES (Prefix)...............: $KEY_ALTNAMES"
else
echo -e "\tKEY_ALTNAMES (Prefix)...............: \033[33mNone\033[m"
fi
echo ""
echo -e "\tOpenVPN Network.....................: $OPENVPN_NETWORK"
echo -e "\tOpenVPN Server IP-Address...........: $OPENVPN_SERVER_IP"
echo ""
if [[ -n "$SERVER_CIPHER" ]] ; then
echo -e "\tServer cipher setting...............: $SERVER_CIPHER"
else
echo -e "\tServer cipher setting...............: \033[33mNone\033[m"
fi
echo -e "\tLZO compression.....................: $LZO_COMPRESSION"
echo ""
if [[ ${#REMOTE_NETWORK_ARR[@]} -gt 0 ]]; then
echo -e "\tRemote networks to push to cliente..: ${REMOTE_NETWORK_ARR[@]}"
else
echo -e "\tRemote networks to push to cliente..: \033[33mNone\033[m"
fi
if [[ -n "$DNS_SERVER" ]]; then
echo -e "\tDNS Server (push from server).......: $DNS_SERVER"
else
echo -e "\tDNS Server (push from server).......: \033[33mNone\033[m"
fi
if [[ ${#SEARCH_DOMAINS_ARR[@]} -gt 0 ]]; then
echo -e "\tDefault Domain (push from server)...: ${SEARCH_DOMAINS_ARR[@]}"
else
echo -e "\tDefault Domain (push from server)...: \033[33mNone\033[m"
fi
echo ""
if [[ ${#LOCAL_NETWORK_ARR[@]} -gt 0 ]]; then
echo -e "\tLocal networks to route through VPN.: ${LOCAL_NETWORK_ARR[@]}"
else
echo -e "\tLocal networks to route through VPN.: \033[33mNone\033[m"
fi
echo ""
if $_only_create_config_file ; then
info "Create configuration file for OpenVPN Service \033[37m\033[1m${OPENVPN_NAME}\033[m.."
else
info "Starting Installation of OpenVPN Service \033[37m\033[1m${OPENVPN_NAME}\033[m.."
fi
echo -n "To continue type uppercase 'YES': "
read OK
echo ""
if [[ "$OK" != "YES" ]] ; then
fatal "Abort by user request - Answer as not 'YES'"
fi
#---------------------------------------
#-----------------------------
# Write Configuration for $OPENVPN_NAME
#-----------------------------
#---------------------------------------
_openvpn_name_conf_file="${script_dir}/conf/server-${OPENVPN_NAME}.conf"
echononl " Write Configuration for OpenVPN Service '$OPENVPN_NAME'"
cat << EOF > $_openvpn_name_conf_file 2> $log_file
## - Configuration/Initialization OpenVPN
## -
# ====================
# - Some Parameter Settings
# ====================
# ---
# - Common parameters
# ---
OPENVPN_SERVER="$OPENVPN_SERVER"
SERVER_PORT=$SERVER_PORT
ORG_SHORTCUT="$ORG_SHORTCUT"
OPENVPN_NAME="$OPENVPN_NAME"
OPENVPN_BASE_DIR="$OPENVPN_BASE_DIR"
OPENVPN_KEY_DIR="$OPENVPN_KEY_DIR"
OPENVPN_CCD_DIR="$OPENVPN_CCD_DIR"
# ---
# - Parameters OpenVPN Configuration / KEY Creation
# ---
# - Example: (3*365+366)*8 = 11688 = 32 Jahre
# - CA_EXPIRE=11688
# -
CA_EXPIRE=$CA_EXPIRE
# - Example: (3*365+366)*5 = 7305 = 20 Jahre
# - CERT_EXPIRE=7305
# -
CERT_EXPIRE=$CERT_EXPIRE
KEY_SIZE=$KEY_SIZE
KEY_COUNTRY="$KEY_COUNTRY"
KEY_PROVINCE="$KEY_PROVINCE"
KEY_CITY="$KEY_CITY"
KEY_ORG="$KEY_ORG"
KEY_EMAIL="${EMAIL_PREFIX}\\@${EMAIL_DOMAIN}"
KEY_OU="$KEY_OU"
KEY_NAME="$KEY_NAME"
EOF
if [[ -n "$KEY_CN" ]] ; then
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
KEY_CN="$KEY_CN"
EOF
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
KEY_CN="none"
EOF
fi
if [[ -n "$KEY_ALTNAMES" ]] ; then
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
KEY_ALTNAMES="$KEY_ALTNAMES"
EOF
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
KEY_ALTNAMES="none"
EOF
fi
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
# ---
# - Parameters for Server Configurations
# ---
EOF
if $LZO_COMPRESSION ; then
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
LZO_COMPRESSION="yes"
EOF
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
LZO_COMPRESSION="no"
EOF
fi
if [[ -n "$SERVER_CIPHER" ]] ; then
if [[ "${SERVER_CIPHER,,}" = "none" ]]; then
cat <<EOF >> "$_client_conf_file" 2>> "$log_file"
cipher BF-CBC
EOF
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
SERVER_CIPHER="$SERVER_CIPHER"
EOF
fi
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
SERVER_CIPHER="$DEFAULT_SERVER_CIPHER"
EOF
fi
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
OPENVPN_NETWORK="$OPENVPN_NETWORK"
EOF
if [[ ${#REMOTE_NETWORK_ARR[@]} -gt 0 ]] ; then
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
REMOTE_NETWORKS="${REMOTE_NETWORK_ARR[@]}"
EOF
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
REMOTE_NETWORKS="none"
EOF
fi
if [[ -n "$DNS_SERVER" ]] ; then
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
DNS_SERVER="$DNS_SERVER"
EOF
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
DNS_SERVER="none"
EOF
fi
if [[ ${#SEARCH_DOMAINS_ARR[@]} -gt 0 ]] ; then
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
SEARCH_DOMAINS="${SEARCH_DOMAINS_ARR[@]}"
EOF
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
SEARCH_DOMAINS="none"
EOF
fi
if [[ ${#LOCAL_NETWORK_ARR[@]} -gt 0 ]]; then
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
LOCAL_NETWORKS="${LOCAL_NETWORK_ARR[@]}"
EOF
else
cat << EOF >> $_openvpn_name_conf_file 2> $log_file
LOCAL_NETWORKS="none"
EOF
fi
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
fatal "$(cat $log_file)"
fi
if $_only_create_config_file ; then
info "Configuration filr for OpenVPN Service \033[1;37m$OPENVPN_NAME\033[m was written \n to file \033[1;37m$_openvpn_name_conf_file\033[m."
clean_up 0
fi
#---------------------------------------
#-----------------------------
# Start Installation
#-----------------------------
#---------------------------------------
check_string_ps=""
check_string_ps_plus=""
if [[ -f "$openvpn_binary" ]] ; then
check_string_ps="$openvpn_binary"
check_string_ps_plus="--daemon"
fi
if [[ -n "$check_string_ps" ]]; then
echononl " Stopping OpenVPN Daemon"
PID=$(ps -e f | grep -E "[[:digit:]]\ ${check_string_ps}" | grep "\ ${check_string_ps_plus}\ " | grep -v grep | awk '{print$2}')
if [[ "X${PID}" = "X" ]]; then
echo_skipped
else
if $systemd_supported ; then
$systemctl stop $service_name > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
echo_failed
error "$(cat $log_file)"
else
echo_ok
fi
else
$init_script stop > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
echo_failed
error "$(cat $log_file)"
else
echo_ok
fi
fi
fi
fi
# - Install needed debian packages
# -
echononl " Install needed debian packages.."
needed_debian_packages=""
for _pkg in $_needed_debian_packages ; do
if aptitude search "$_pkg" | grep " $_pkg " | grep -e "^i" > /dev/null 2>&1 ; then
continue
else
needed_debian_packages="$needed_debian_packages $_pkg"
fi
done
if [[ -n "$needed_debian_packages" ]]; then
DEBIAN_FRONTEND=noninteractive apt-get -y install $needed_debian_packages > /dev/null 2> "$log_file"
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
fatal "$(cat $log_file)"
fi
else
echo_skipped
fi
echononl " Backup directory '${OPENVPN_BASE_DIR}'.."
if [[ -d "$OPENVPN_BASE_DIR" ]]; then
mv $OPENVPN_BASE_DIR ${OPENVPN_BASE_DIR}.$_date > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
else
echo_skipped
fi
# - Make the package included scripts available in directory
# - "/etc/openvpn/easy-rsa"
# -
echononl " Create directory '${EASY_RSA_DIR}'.."
/usr/bin/make-cadir $EASY_RSA_DIR > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
# - Create Key Directory
# -
# - Note:
# - Not needed on debian 10 or up. 'easyrsa init-pki' does the job.
# -
if [[ "$os_dist" = "debian" ]] && [[ $os_version -lt 10 ]] ; then
echononl " Create key directory '${OPENVPN_BASE_DIR}/keys'.."
mkdir ${OPENVPN_BASE_DIR}/keys > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
echononl " Change permissions (700) in directory '${OPENVPN_BASE_DIR}/keys'.."
chmod 700 "${OPENVPN_BASE_DIR}/keys" > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
fi
# - Create Log Directory
# -
openvpn_log_dir="/var/log/openvpn"
echononl " Create log directoy '${openvpn_log_dir}'"
if [[ -d "${openvpn_log_dir}" ]] ; then
echo_skipped
else
mkdir /var/log/openvpn > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
fi
# - Create client configuration directory
# -
echononl " Create Client configuration directory '$OPENVPN_CCD_DIR'"
if [[ -d "${OPENVPN_CCD_DIR}" ]] ; then
echo_skipped
else
mkdir -p "${OPENVPN_CCD_DIR}" > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
fi
# - Backup file keys-created.txt
# -
echononl " Backup file '${OPENVPN_BASE_DIR}/keys-created.txt"
if [[ -f "${OPENVPN_BASE_DIR}/keys-created.txt" ]]; then
mv "${OPENVPN_BASE_DIR}/keys-created.txt" "${OPENVPN_BASE_DIR}/keys-created.txt.${_date}" > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
else
echo_skipped
fi
# - Adjust /etc/default/openvpn
# -
# - AUTOSTART="all"
# -
_file="/etc/default/openvpn"
echononl " Adjust '/etc/default/openvpn'. Set AUTOSTART=\"all\""
if ! grep -i -q -E "^\s*AUTOSTART=\"all\"" ${_file} ; then
if grep -i -q -E "^\s*#\s*AUTOSTART=\"all\"" ${_file} ; then
perl -i -n -p -e "s/^(\s*#\s*AUTOSTART=\"all\".*)/##\1\nAUTOSTART=\"all\"/" ${_file} > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
else
echo "" >> ${_file}
echo "AUTOSTART=\"all\"" >> ${_file}
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
fi
else
echo_skipped
fi
# - Adjust /etc/openvpn/easy-rsa/vars
# -
# - Debian Version <= 9
# - add:
# - export BASE_DIR=$OPENVPN_BASE_DIR
# -
# - replace:
# - export EASY_RSA=\$BASE_DIR/easy_rsa
# - export KEY_DIR=\$OPENVPN_KEY_DIR
# -
# - export KEY_SIZE=$KEY_SIZE
# -
# - # root CA expires in 30 years (= 10950 days)
# - export CA_EXPIRE=$CA_EXPIRE
# -
# - # certificates expires in 20 years (=7300 days)
# - export CERT_EXPIRE=$CERT_EXPIRE
# -
# - export KEY_COUNTRY="$KEY_COUNTRY"
# - export KEY_PROVINCE="$KEY_PROVINCE"
# - export KEY_CITY="$KEY_CITY"
# - export KEY_ORG="$KEY_ORG"
# - export KEY_EMAIL="$KEY_EMAIL"
# - export KEY_OU="$KEY_OU"
# -
# - export KEY_NAME="$KEY_NAME"
# -
# - #export KEY_CN="$KEY_CN"
# -
# - Debiab Version >= 10
# - set_var EASYRSA "${0%/*}"
# - set_var EASYRSA_OPENSSL "openssl"
# - set_var EASYRSA_PKI "$OPENVPN_KEY_DIR"
# - set_var EASYRSA_ALGO rsa
# - set_var EASYRSA_DN "org"
# - set_var EASYRSA_REQ_COUNTRY "$KEY_COUNTRY"
# - set_var EASYRSA_REQ_PROVINCE "$KEY_PROVINCE"
# - set_var EASYRSA_REQ_CITY "$KEY_CITY"
# - set_var EASYRSA_REQ_ORG "$KEY_ORG"
# - set_var EASYRSA_REQ_EMAIL "$KEY_EMAIL"
# - set_var EASYRSA_REQ_OU "$KEY_OU"
# -
# - set:var EASYRSA_REQ_CN "$KEY_CN"
# -
# - set_var EASYRSA_CA_EXPIRE "$CA_EXPIRE"
# - set_var EASYRSA_CERT_EXPIRE "$CERT_EXPIRE"
# -
# - set_var EASYRSA_CRL_DAYS "$CERT_EXPIRE"
# - set_var EASYRSA_CERT_RENEW "365"
# -
_failed=false
echononl " Adjust '${EASY_RSA_DIR}/vars'.."
if [[ "$os_dist" = "debian" ]] && [[ $os_version -gt 9 ]] ; then
#perl -i.$_date -n -p -e "s&^(\s*#*\s*#set_var\s+EASYRSA\s+.*)&##\1\nset_var EASYRSA\t \"\\\${0%/*}\"&" ${EASY_RSA_DIR}/vars > "$log_file"
perl -i.$_date -n -p -e "s&^(\s*#*\s*#set_var\s+EASYRSA\s+.*)&##\1\nset_var EASYRSA\t \"${OPENVPN_BASE_DIR}/easy-rsa\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_OPENSSL"
_val="openssl"
perl -i.$_date -n -p -e "s&^(\s*#*\s*#set_var\s+${_key}\s+.*)&##\1\nset_var ${_key}\t \"${_val}\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_PKI"
_val="${OPENVPN_KEY_DIR}"
perl -i.$_date -n -p -e "s&^(\s*#*\s*#set_var\s+${_key}\s+.*)&##\1\nset_var ${_key}\t \"${_val}\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
# EASYRSA_KEY_SIZE
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+EASYRSA_KEY_SIZE\s+.*)&##\1\nset_var EASYRSA_KEY_SIZE\t\t ${KEY_SIZE}&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
# EASYRSA_ALGO
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+EASYRSA_ALGO\s+.*)&##\1\nset_var EASYRSA_ALGO\t\t rsa&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
# EASYRSA_KEY_SIZE
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+EASYRSA_KEY_SIZE\s+.*)&##\1\nset_var EASYRSA_KEY_SIZE\t\t ${KEY_SIZE}&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_DN"
_val=""org
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+EASYRSA_DN\s+.*)&##\1\nset_var EASYRSA_DN\t\t \"org\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_REQ_COUNTRY"
_val="$KEY_COUNTRY"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_REQ_PROVINCE"
_val="$KEY_PROVINCE"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_REQ_CITY"
_val="$KEY_CITY"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_REQ_ORG"
_val="$KEY_ORG"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_REQ_EMAIL"
_val="$KEY_EMAIL"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_REQ_OU"
_val="$KEY_OU"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_REQ_CN"
_val="$KEY_CN"
perl -i.$_date -n -p -e "s&^(\s*#*\s*#set_var\s+${_key}\s+.*)&##\1\nset_var ${_key}\t \"${_val}\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_CA_EXPIRE"
_val="$CA_EXPIRE"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_CERT_EXPIRE"
_val="$CERT_EXPIRE"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_CRL_DAYS"
_val="$CERT_EXPIRE"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_CERT_RENEW"
_val="365"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_REQ_CN"
_val="$KEY_CN"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
_key="EASYRSA_BATCH"
_val="1"
perl -i -n -p -e "s&^(\s*#*\s*#set_var\s+$_key\s+.*)&##\1\nset_var $_key\t\t \"$_val\"&" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
else
perl -i.$_date -n -p -e "s&^(\s*#*\s*export\s+EASY_RSA=.*)&##\1\nexport BASE_DIR=\"${OPENVPN_BASE_DIR}\"\nexport EASY_RSA=\"\\\$BASE_DIR/easy-rsa\"&" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s&^(\s*#*\s*export\s+KEY_DIR=.*)&##\1\nexport KEY_DIR=\"${OPENVPN_KEY_DIR}\"&" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_SIZE=.*)/##\1\nexport KEY_SIZE=$KEY_SIZE/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+CA_EXPIRE=.*)/##\1\nexport CA_EXPIRE=$CA_EXPIRE/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+CERT_EXPIRE=.*)/##\1\nexport CERT_EXPIRE=$CERT_EXPIRE/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_COUNTRY=.*)/##\1\nexport KEY_COUNTRY=\"${KEY_COUNTRY}\"/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_PROVINCE=.*)/##\1\nexport KEY_PROVINCE=\"${KEY_PROVINCE}\"/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_CITY=.*)/##\1\nexport KEY_CITY=\"${KEY_CITY}\"/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_ORG=.*)/##\1\nexport KEY_ORG=\"${KEY_ORG}\"/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_EMAIL=.*)/##\1\nexport KEY_EMAIL=\"${EMAIL_PREFIX}\@${EMAIL_DOMAIN}\"/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_OU=.*)/##\1\nexport KEY_OU=\"${KEY_OU}\"/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_NAME=.*)/##\1\nexport KEY_NAME=\"${KEY_NAME}\"/" ${EASY_RSA_DIR}/vars > "$log_file"
2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*#*\s*export\s+KEY_CN=.*)/#\1\nexport KEY_CN=\"${KEY_CN}\"/" ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
fi
echo -e "\nexport KEY_ALTNAMES=\"$KEY_ALTNAMES\"" >> ${EASY_RSA_DIR}/vars 2> "$log_file"
if [[ $? -ne 0 ]]; then
_failed=true
fi
if $_failed ; then
echo_failed
error "$(cat $log_file)"
else
echo_ok
fi
#---------------------------------------
#-----------------------------
# Initial Setup OpenVPN (Root ca / Server key /..)
#-----------------------------
#---------------------------------------
echo ""
# - source file vars
# -
# - Note:
# - since debian buster, sourcing an Easy-RSA 'vars' file is no longer
# - necessary and is disallowed. The vars file is automatically read when
# - you call easyrsa commands.
# -
if [[ "$os_dist" = "debian" ]] && [[ $os_version -lt 10 ]] ; then
echononl " Load configuration '${EASY_RSA_DIR}/vars'.."
source ${EASY_RSA_DIR}/vars > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
if [[ ! -f "$KEY_CONFIG" ]] ; then
echononl " Create Symlink '$(basename $KEY_CONFIG)'.."
if [[ -f "$(dirname $KEY_CONFIG)/openssl-1.0.0.cnf" ]]; then
ln -s "$(dirname $KEY_CONFIG)/openssl-1.0.0.cnf" "$KEY_CONFIG"
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
error "Cannot create symlink '$KEY_CONFIG'!"
echononl "continue anyway [yes/no]: "
read OK
OK="$(echo "$OK" | tr '[:upper:]' '[:lower:]')"
while [[ "$OK" != "yes" ]] && [[ "$OK" != "no" ]] ; do
echononl "Wrong entry! - repeat [yes/nno]: "
read OK
done
[[ $OK = "yes" ]] || fatal "Abbruch durch User"
fi
else
echo_failed
error "No OpenSSL configuration file present!"
echononl "continue anyway [yes/no]: "
read OK
OK="$(echo "$OK" | tr '[:upper:]' '[:lower:]')"
while [[ "$OK" != "yes" ]] && [[ "$OK" != "no" ]] ; do
echononl "Wrong entry! - repeat [yes/nno]: "
read OK
done
[[ $OK = "yes" ]] || fatal "Abbruch durch User"
fi
fi
_failed=false
OPENSSL_CONFIG_FILE="$(realpath "$KEY_CONFIG")"
echononl " Adjust '$OPENSSL_CONFIG_FILE'.."
perl -i.ORIG -n -p -e "s/^(\s*default_days\s*=.*)/#\1\ndefault_days = $CA_EXPIRE/" $OPENSSL_CONFIG_FILE > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
perl -i -n -p -e "s/^(\s*default_crl_days\s*=.*)/#\1\ndefault_crl_days = $CA_EXPIRE/" $OPENSSL_CONFIG_FILE > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
_failed=true
fi
if $_failed ; then
echo_failed
error "$(cat $log_file)"
else
echo_ok
fi
fi
# ---
# - Create Keys and Certs
# ---
echo ""
echo -e "\033[32m--\033[m"
echo "Create Keys and Certs .."
echo -e "\033[32m--\033[m"
# - Initialise key directory
# -
if [[ "$os_dist" = "debian" ]] && [[ $os_version -lt 10 ]] ; then
# - Create file 'serial' with value '01' - the serial for the next
# - created certificate
# -
echononl " Create '${OPENVPN_KEY_DIR}/serial'.."
echo "01" > "${OPENVPN_KEY_DIR}/serial" 2> "$log_file"
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
# - Create empty file index.txt at key-directory
# -
echononl " Create empty file '${OPENVPN_KEY_DIR}/index.txt'.."
touch ${OPENVPN_KEY_DIR}/index.txt
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
else
# - Removes & re-initializes the PKI dir for a clean PKI
# -
echononl " Initialise PKI Directory"
${EASY_RSA_DIR}/easyrsa init-pki > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
fi
# - Create Root CA
# -
echononl " Create Root CA.."
if [[ "$os_dist" = "debian" ]] && [[ $os_version -lt 10 ]] ; then
printf "\n\n\n\n\n\n\n\n" | ${EASY_RSA_DIR}/build-ca > "$log_file" 2>&1
else
printf "\n\n\n\n\n\n\n" | ${EASY_RSA_DIR}/easyrsa build-ca nopass > "$log_file" 2>&1
fi
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
# - Generate Diffie-Hellman parameters for the server side
# - of an SSL/TLS connection.
# -
echononl " Generates DH (Diffie-Hellman) parameters (dh key).."
if [[ "$os_dist" = "debian" ]] && [[ $os_version -lt 10 ]] ; then
if [[ -f "${script_dir}/dh${KEY_SIZE}.pem" ]]; then
#cp "${script_dir}/dh${KEY_SIZE}.pem" "${OPENVPN_KEY_DIR}/dh${KEY_SIZE}.pem" > "$log_file" 2>&1
openssl dhparam -dsaparam -out "${OPENVPN_KEY_DIR}/dh${KEY_SIZE}.pem" ${KEY_SIZE} > "$log_file" 2>&1
else
${EASY_RSA_DIR}/build-dh > "$log_file" 2>&1
fi
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
_DH_KEY=${OPENVPN_KEY_DIR}/dh${KEY_SIZE}.pem
else
if [[ -f "${script_dir}/dh${KEY_SIZE}.pem" ]]; then
cp "${script_dir}/dh${KEY_SIZE}.pem" "${OPENVPN_KEY_DIR}/dh.pem" > "$log_file" 2>&1
else
#${EASY_RSA_DIR}/easyrsa gen-dh > "$log_file" 2>&1
openssl dhparam -dsaparam -out "${OPENVPN_KEY_DIR}/dh.pem" ${KEY_SIZE} > "$log_file" 2>&1
fi
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
_DH_KEY="${OPENVPN_KEY_DIR}/dh.pem"
fi
# - Generate Sever Key
# -
if [[ "$os_dist" = "debian" ]] && [[ $os_version -lt 10 ]] ; then
echo ""
echo -e " \033[32mNow create the server key. Tis procedure works interactive.\033[m"
echo -e " Use \033[37m\033[1m${KEY_CN}-server\033[m as 'commonName'"
echo ""
echononl "Type <return> to continue: "
read ok
echo ""
${EASY_RSA_DIR}/build-key-server server
if [[ $? -eq 0 ]] ; then
info "Building server key was successfully."
else
error "Building server key failed!"
fi
echo ""
echononl "Type <return> to continue: "
read ok
echo ""
_SERVER_KEY="${OPENVPN_KEY_DIR}/server.key"
_SERVER_CERT="${OPENVPN_KEY_DIR}/server.crt"
else
# - Generate server keypair
# -
# - build-server-full <filename_base> [ cmd-opts ]
# - Generate a keypair and sign locally for a client and/or server
# -
# - This mode uses the <filename_base> as the X509 CN.
# -
# - cmd-opts is an optional set of command options from this list:
# - nopass - do not encrypt the private key (default is encrypted)
# -
echononl " Generate server keypair '${KEY_CN}-server'.."
${EASY_RSA_DIR}/easyrsa build-server-full "${KEY_CN}-server" nopass > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
_SERVER_KEY="${OPENVPN_KEY_DIR}/private/${KEY_CN}-server.key"
_SERVER_CERT="${OPENVPN_KEY_DIR}/issued//${KEY_CN}-server.crt"
fi
# - For extra security beyond that provided
# - by SSL/TLS, create an "HMAC firewall"
# - to help block DoS attacks and UDP port flooding.
# -
echononl " Create 'ta.key' for additional security"
openvpn --genkey --secret ${OPENVPN_KEY_DIR}/ta.key > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
# - Create empty CRL (Certificate Revokation List)
# -
if [[ "$os_dist" = "debian" ]] && [[ $os_version -lt 10 ]] ; then
echononl " Create CRL (Certificate Revokation List) '${OPENVPN_BASE_DIR}/crl.pem'.."
openssl ca -gencrl -out ${OPENVPN_KEY_DIR}/crl.pem -config $KEY_CONFIG > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
else
echononl " Create CRL (Certificate Revokation List) '${OPENVPN_KEY_DIR}/crl.pem'.."
${EASY_RSA_DIR}/easyrsa gen-crl > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
fi
echononl " Change permissions (750) for '${OPENVPN_KEY_DIR}'.."
chmod 750 "${OPENVPN_KEY_DIR}" > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
echononl " Change group (to nogroup) for '${OPENVPN_KEY_DIR}'.."
chgrp nogroup "${OPENVPN_KEY_DIR}" > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
echononl " Change group (to nogroup) for '${OPENVPN_KEY_DIR}/crl.pem'.."
chgrp nogroup "${OPENVPN_KEY_DIR}/crl.pem" > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
echononl " Change permissions (640) for ${OPENVPN_KEY_DIR}/crl.pem"
chmod 644 ${OPENVPN_KEY_DIR}/crl.pem > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
# ----
# - Create server configurations
# ----
echo ""
echo -e "\033[32m--\033[m"
echo "Server configurations .."
echo -e "\033[32m--\033[m"
#---------------------------------------
#-----------------------------
# Write Server Configuration for $OPENVPN_NAME
#-----------------------------
#---------------------------------------
_server_conf_file="/etc/openvpn/server-${OPENVPN_NAME}.conf"
echononl " Backup file $_server_conf_file"
if [[ -f "$_server_conf_file" ]] ; then
mv "$_server_conf_file" "${_server_conf_file}.$_date" > "$log_file" 2>&1
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
else
echo_skipped
fi
echononl " Create configuration '${_server_conf_file}"
cat <<EOF > ${_server_conf_file} 2> "$log_file"
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\\\Program Files\\\\OpenVPN\\\\config\\\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################
# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port $SERVER_PORT
# TCP or UDP server?
;proto tcp
proto udp
topology subnet
EOF
if [[ ${#LOCAL_NETWORK_ARR[@]} -gt 0 ]]; then
for _local_network in ${LOCAL_NETWORK_ARR[@]} ; do
IFS='/' read -a _net_arr <<< "${_local_network}"
if [[ -n ${_net_arr[1]} ]]; then
_netmask=$(cidr2mask ${_net_arr[1]})
else
_netmask="255.255.255.0"
fi
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
route ${_net_arr[0]} $_netmask $OPENVPN_SERVER_IP
EOF
done
fi
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap" if you are ethernet bridging.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Enable TUN IPv6 module
;tun-ipv6
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ${OPENVPN_KEY_DIR}/ca.crt
cert $_SERVER_CERT
key $_SERVER_KEY # This file should be kept secret
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys.
dh $_DH_KEY
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
;server 10.8.0.0 255.255.255.0
;server-ipv6 2a01:30:1fff:fd00::/64
server $OPENVPN_NETWORK 255.255.255.0
# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ${OPENVPN_BASE_DIR}/ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 10.8.0.0 255.255.255.0"
EOF
if [[ ${#REMOTE_NETWORK_ARR[@]} -gt 0 ]]; then
for _remote_network in ${REMOTE_NETWORK_ARR[@]} ; do
IFS='/' read -a _net_arr <<< "${_remote_network}"
if [[ -n ${_net_arr[1]} ]]; then
_netmask=$(cidr2mask ${_net_arr[1]})
else
_netmask="255.255.255.0"
fi
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
push "route ${_net_arr[0]} $_netmask"
EOF
done
fi
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
client-config-dir $OPENVPN_CCD_DIR
# ---
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir /etc/openvpn/ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# ---
# ---
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# ---
# ---
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# ---
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# the TUN/TAP interface to the internet in
# order for this to work properly).
# CAVEAT: May break client's network config if
# client's local DHCP server packets get routed
# through the tunnel. Solution: make sure
# client's local DHCP server is reachable via
# a more specific route than the default route
# of 0.0.0.0/0.0.0.0.
;push "redirect-gateway"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
;push "dhcp-option WINS 10.8.0.1"
EOF
if [[ -n "$DNS_SERVER" ]]; then
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
push "dhcp-option DNS ${DNS_SERVER}"
EOF
fi
if [[ ${#SEARCH_DOMAINS_ARR[@]} -gt 0 ]]; then
for _domain in ${SEARCH_DOMAINS_ARR[@]} ; do
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
push "dhcp-option DOMAIN ${_domain}"
EOF
done
fi
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret
tls-auth ${OPENVPN_KEY_DIR}/ta.key 0
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
EOF
if [[ -n "$SERVER_CIPHER" ]]; then
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
cipher $SERVER_CIPHER
EOF
fi
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
;comp-lzo
EOF
if $LZO_COMPRESSION ; then
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
comp-lzo
EOF
fi
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nogroup
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
persist-local-ip
persist-remote-ip
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
;status openvpn-status.log
status /var/log/openvpn/status-server-${OPENVPN_NAME}.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log-append openvpn.log
;log openvpn.log
log /var/log/openvpn/server-${OPENVPN_NAME}.log
# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 1
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20
EOF
if [[ -h "${OPENVPN_BASE_DIR}/crl.pem" ]] ; then
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
# CRL (certificate revocation list) verification
crl-verify ${OPENVPN_BASE_DIR}/crl.pem
EOF
elif [[ -f "${OPENVPN_KEY_DIR}/crl.pem" ]]; then
cat <<EOF >> ${_server_conf_file} 2>> "$log_file"
# CRL (certificate revocation list) verification
crl-verify ${OPENVPN_KEY_DIR}/crl.pem
EOF
fi
if [[ $? -eq 0 ]] ; then
echo_ok
else
echo_failed
error "$(cat $log_file)"
fi
echo ""
# - Start OpenVPN Service
# -
echononl " Start OpenVPN Service"
if $systemd_supported ; then
$systemctl start $service_name > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
echo_failed
error "$(cat $log_file)"
else
echo_ok
fi
else
$init_script start > "$log_file" 2>&1
if [[ $? -ne 0 ]]; then
echo_failed
error "$(cat $log_file)"
else
echo_ok
fi
fi
# - See if OpenVPN Service is running/has started
#
check_string_ps="$openvpn_binary"
check_string_ps_plus="--daemon"
sleep 2
PID=$(ps -e f | grep -E "[[:digit:]]\ ${check_string_ps}" | grep "\ ${check_string_ps_plus}\ " | grep -v grep | awk '{print$2}')
if [[ "X${PID}" = "X" ]]; then
warn "\033[37m\033[1mOpenVPN Service is NOT running.\033[m\n Maybe you have to restart the machine in order to start openvpn daemon."
fi
echo ""
clean_up 0
Reference in New Issue View Git Blame Copy Permalink